Wavelength-multiplexed duplex transceiver based on III-V/Si hybrid integration for off-chip and on-chip optical interconnects

A six-channel wavelength-division-multiplexed optical transceiver with a compact footprint of 1.5 x 0.65 mm(2) for off-chip and on-chip interconnects is demonstrated on a single silicon-on-insulator chip. An arrayed waveguide grating is used as the (de)multiplexer, and III-V electroabsorption sections fabricated by hybrid integration technology are used as both modulators and detectors, which also enable duplex links. The 30-Gb/s capacity for each of the six wavelength channels for the off-chip transceiver is demonstrated. For the on-chip interconnect, an electrical-to-electrical 3-dB bandwidth of 13 GHz and a data rate of 30 Gb/s per wavelength are achieved

Key nodes of a microRNA network associated with the integrated mesenchymal subtype of high-grade serous ovarian cancer

Metastasis is the main cause of cancer mortality. One of the initiating events of cancer metastasis of epithelial tumors is epithelial-to-mesenchymal transition (EMT), during which cells dedifferentiate from a relatively rigid cell structure/morphology to a flexible and changeable structure/morphology often associated with mesenchymal cells. The presence of EMT in human epithelial tumors is reflected by the increased expression of genes and levels of proteins that are preferentially present in mesenchymal cells. The combined presence of these genes forms the basis of mesenchymal gene signatures, which are the foundation for classifying a mesenchymal subtype of tumors. Indeed, tumor classification schemes that use clustering analysis of large genomic characterizations, like The Cancer Genome Atlas (TCGA), have defined mesenchymal subtype in a number of cancer types, such as high-grade serous ovarian cancer and glioblastoma. However, recent analyses have shown that gene expression-based classifications of mesenchymal subtypes often do not associate with poor survival. This “paradox” can be ameliorated using integrated analysis that combines multiple data types. We recently found that integrating mRNA and microRNA (miRNA) data revealed an integrated mesenchymal subtype that is consistently associated with poor survival in multiple cohorts of patients with serous ovarian cancer. This network consists of 8 major miRNAs and 214 mRNAs. Among the 8 miRNAs, 4 are known to be regulators of EMT. This review provides a summary of these 8 miRNAs, which were associated with the integrated mesenchymal subtype of serous ovarian cancer

Preparation of Pectin–ZnO Nanocomposite

Pectin–ZnO nanocomposite was prepared in the aqueous solution condition at room temperature. The Fourier transform infrared, X-ray diffraction, and transmission electron microscope (TEM) measurements confirmed the nanoscaled structure of pectin–ZnO composite. According to the TEM observation, the average composite granules size was about 150 nm and the embedded ZnO nanoparticles were uniform with an average diameter of 70 nm

Reconstruction of the complete characteristics of the hydro turbine based on inner energy loss

The power output characteristics of the hydro turbine is one of the core contents for transient calculation of the hydro turbine generating sets (HTGS). In particular, the hydro turbine operates far beyond the given parameters region during the load rejection transient. As such, obtaining the complete characteristics of the hydro turbine becomes one of the key issues in calculating the transient process. In this study, methods for calculating the energy losses are proposed by analyzing the general characteristics of the inner energy losses within the hydro turbine. Characteristic parameters in the hydro turbine power model are calculated from the synthetical characteristics of the model hydro turbine. The transient power model of the hydro turbine has been established and applied to calculate and reconstruct the complete characteristics of the hydro turbine. Furthermore, the relationship curve between the mechanical friction loss power and the rotation speed under different head can be established by combing the runaway curve with the proposed turbine power model. This relationship is applied to construct the complete characteristics of the mechanical friction loss. Combining the proposed two complete characteristics, the power model of the hydro turbine is suitable for simulation with a wide range of fluctuations as well as the load rejection transient. Details of the computational procedures are presented and demonstrated using a case study.The research reported here is financially supported by the National Natural Science Foundation of China under Grant No. 51579124, 51469011,51279071

Anticancer Gene Transfer for Cancer Gene Therapy

Gene therapy vectors are among the treatments currently used to treat malignant tumors. Gene therapy vectors use a specific therapeutic transgene that causes death in cancer cells. In early attempts at gene therapy, therapeutic transgenes were driven by non-specific vectors which induced toxicity to normal cells in addition to the cancer cells. Recently, novel cancer specific viral vectors have been developed that target cancer cells leaving normal cells unharmed. Here we review such cancer specific gene therapy systems currently used in the treatment of cancer and discuss the major challenges and future directions in this field

Mesenchymal stem cell transplantation for diffuse alveolar hemorrhage in SLE

Background. A 19-year-old girl was diagnosed with systemic lupus erythematosus, based on findings of arthritis, malar rash, positive antinuclear antibody test and high levels of antibodies to double-stranded DNA. Two months after diagnosis, the patient presented with a sudden drop in blood hemoglobin level. Several days later, she developed bloody sputum, rapidly progressive dyspnea and hypoxemia. High-resolution CT showed diffuse alveolar infiltrates in both lung fields.Investigations. Physical examination, complete blood count, erythrocyte sedimentation rate, urinalysis, 24-h urine protein excretion, fecal occult blood test, d-dimer test, acid hemolysis test, activated partial thromboplastin time and prothrombin time, direct and indirect Coombs tests, bone marrow smear, arterial blood gas, sputum smear and culture, and high-resolution CT scan of the chest.Diagnosis. Diffuse alveolar hemorrhage associated with systemic lupus erythematosus.Management. The patient did not respond to pulsed intravenous methylprednisolone (two courses of 500 mg per day for 3 days) and intravenous immunoglobulin (20 g per day for 5 days). The patient was referred to a specialist treatment center for allogenic transplantation using umbilical-cord-derived mesenchymal stem cells. She underwent transplantation with an infusion of 8 - 10 7 mesenchymal stem cells. After showing dramatic improvements in her clinical condition, oxygenation level, radiographic and hematological status, the patient was discharged from hospital approximately 5 weeks after undergoing transplantation. © 2010 Macmillan Publishers Limited.postprin

An experimental investigation into the dimensional error of powder-binder three-dimensional printing

This paper is an experimental investigation into the dimensional error of the rapid prototyping additive process of powder-binder three-dimensional printing. Ten replicates of a purpose-designed part were produced using a three-dimensional printer, and measurements of the internal and external features of all surfaces were made using a general purpose coordinate measuring machine. The results reveal that the bases of all replicates (nominally flat) have a concave curvature, producing a flatness error of the primary datum. This is in contrast to findings regarding other three-dimensional printing processes, widely reported in the literature, where a convex curvature was observed. All external surfaces investigated in this study showed positive deviation from nominal values, especially in the z-axis. The z-axis error consisted of a consistent positive cumulative error and a different constant error in different replicates. By compensating for datum surface error, the average total height error of the test parts can be reduced by 25.52 %. All the dimensional errors are hypothesised to be explained by expansion and the subsequent distortion caused by layer interaction during and after the printing process